This eLeaf LCD meter can show you real time loaded and unloaded voltage/wattage in real-world conditions. The benefit of testing in a loaded condition is you can see potential voltage drop, this is the difference between actual unloaded battery voltage and loaded battery voltage. You can determine with loaded voltage if your battery is meeting the demands of the load. Does not work on switching or pulse regulated vv/vw devices.
1. LCD screen
2. Real-time resistance/voltage/wattage display
3. Short-circuit protection
4. Over-voltage and low-voltage protection
5. Over-current protection.
- Length x Diameter: 47mm x 22mm
- Material: Plastic tube with stainless steel structure inside
- Input voltage: 2.5V~6.5V
- Testable wattage: =100W
- Maximum current: =10A
- Resistance range: 0.5~10O (will not test loads with lower than .5 ohms)
- Output voltage: 2.5~6.5V
When only connecting to battery, press the battery button, the LCD Screen will first display "NoO"(meaning no resistance), then the voltage of this battery.
When connecting to battery and atomizer in the same time, press the button, the LCD Screen will first display the atomizer resistance, then the current voltage and wattage after 1 second.
Short-circuit protection: When the resistance is lower than 0.5O, the LCD Screen will show "E1".
Attention: The LCD meter is not self powered, this meter requires you thread this on a power source.