Updated in Kanger Protank 3:
Pyrex tank is replaceable
Glue Free: All parts are replaceable
Can be fitted with 510 Drip tip
Replaceable Atomizer Heads
Pyrex Glass Tank
Advertised with a 2.5ml capacity
Dimensions: 1-15/16"L x 3/4"D (without drip tip)
The metal tube in the center of this Clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Clearomizer.
When unfastening the base (atomizer head) to refill the Clearomizer, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the center tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the Clearomizer.
Gurgling noise or leaks: This is a sign that liquid has found its way into the metal tube in the center of the Clearomizer (and usually occurs after a refill). Ridding the center tube of liquid will resolve the issue. To do so without emptying the tank, remove the Clearomizer from the battery, wrap a cloth or tissue around the battery end of the Clearomizer and blow through the mouthpiece.
The atomizer head of the Protank can unfasten when unscrewing the tube or base. Always secure the atomizer head before reinstalling the base of the Protank.
It is normal to find a small amount of liquid in the battery contact area when removing the Clearomizer or any atomizer. We recommend cleaning the battery before charging it.
When possible, keep the tank full and never below 1/3 full of eLiquid ("topped off"). This helps maintain the "vacuum" in the tank and prevent leaks.
When the atomizer head wears down, it may begin to leak. Replace the atomizer head with a new one if available.
FOR BEST RESULTS: * Do not use with liquids that have a high VG ratio as this will result in poor wicking and ultimately will damage the coils. - **Also remember that this being a dual coil unit may require a higher voltage output from your device to get the same performance level that you may have received from your Protank 1/2. This device has a max voltage input of 6V. ***Users with input devices of 3.7v and below would be better suited with the Kanger Protank 2 (single coil) setup.
1 x Kanger Protank 3 (Pyrex tank, top cap, bottom cap and 510 base)
1 x 510 Kanger Protank SS Drip tip
2 x Dual Coil v1 Atomizer Head for Kanger Protank
Note: There is No Warranty, Return, Refund Or Exchange of this Item.